How to setup hp laserjet m404-405dn

Here are the general steps to set up an HP LaserJet M404-405dn printer:

1. Unpack the printer: Remove all packaging materials from the printer and its accessories.

2. Install the toner cartridge: Open the front cover of the printer, and then remove the toner cartridge from its packaging. Remove any protective tape or seals, and then insert the toner cartridge into the printer.

3. Load paper: Open the paper tray, and then adjust the paper guides to fit the size of the paper you are using. Load the paper into the tray, and then close the tray.

4. Connect the printer to a network: Connect an Ethernet cable from the printer to your network switch or router. Alternatively, you can connect the printer to your computer using a USB cable.

5. Turn on the printer: Press the power button on the printer to turn it on.

6. Configure network settings: On the printer's control panel, navigate to the "Network" menu, and then select "Network Settings." Configure the printer's network settings, such as the IP address, subnet mask, and gateway.

7. Install the printer driver: Insert the printer driver CD into your computer, and then follow the on-screen instructions to install the printer driver. Alternatively, you can download the printer driver from the HP website.

8. Print a test page: After the printer driver is installed, open a document or image, and then print a test page to verify that the printer is working correctly.

It's important to note that the specific steps for setting up an HP LaserJet M404-405dn printer may vary depending on your operating system and network configuration. Be sure to refer to the printer's user manual or the HP support website for more detailed instructions.